BONFIX C-steel compression fitting elbow reduced 108 - 1/2inch x 15mm FRp
Description
This compression fitting is only suitable for central heating systems.
- Connection: elbow reduced FRp (internal thread x female)
- Diameter: 1/2inch x 15mm
- Max. working pressure water: 10bar
- Equipped with KIWA approval
The BONFIX compression fitting consists of 3 parts: the housing, the compression ring and the compression nut. This is delivered fully assembled so that it can then be easily connected to the pipe. The compression ring is clamped between the two bores of the compression nut and the housing. By tightening the compression nut, the ring will deform first on the side of the housing, because there the angle of the housing is smaller than that of the nut. By further tightening, the other side of the ring will also be clamped in the nut. As a result, the high pressure on the ring ensures a hermetic seal. BONFIX compression fittings are equipped with a brass compression ring. After using the compression fitting, the compression ring cannot be used again.
- This compression fitting is suitable for multiple applications with working pressures up to 10bar
- Closed heating systems (central heating) 0° to +90°C
Technische specificaties
| Article number | 53810 |
| EAN nummer | 8717845538101 |
| Brand | Bonfix |
| Model | Reducing elbow |
| Connection | FRp (female x internal thread) |
| Certification | none |
| Application | Heating |
| Collecties 2 | Compression fittings c-steel |
| Material | C-steel (carbon steel) |
| Diameter | 1/2inch 15mm |