Chipboard screws 4.0 x 50 partial thread

Description

Strong 4.0 x 50 mm Wood Screws for Light to Medium-Duty Wood Connections

These 4.0 × 50 mm partial thread chipboard screws are designed for wood connections where good clamping force and controlled penetration depth are required. The screws are suitable for applications in solid wood, plywood, MDF, OSB and chipboard. Chipboard screws are versatile and widely used for wood and sheet materials thanks to their strong grip and ease of installation.

The Torx TX20 drive ensures optimal grip and efficient torque transfer during installation. This prevents cam-out and allows the screw to be driven in smoothly and with control — also with this 50 mm version.

The countersunk head sits neatly flush with the wood surface, providing a clean finish for both structural work and visible applications.

With a 4.0 mm diameter and 50 mm length, this size is ideal for general wood connections and medium-thin materials.

Why choose these chipboard screws?

✔ Ideal for 16–22 mm thick boards and sheet materials
✔ Partial thread — strongly pulls two wooden parts together
✔ 4.0 mm diameter — good balance between strength and ease of use
✔ Torx TX20 — optimal grip with reduced risk of cam-out
✔ Suitable for interior work and light constructions
✔ Pack of 200 pieces — ideal for larger jobs

When do you use 4.0 x 50 mm screws?

A 4.0 × 50 mm partial thread chipboard screw is used when a strong but compact wood connection is required.

Typical applications include:

• Fixing 16–22 mm thick boards
• Installing MDF, plywood and chipboard
• Furniture assembly and interior construction
• Panels, battens and light framework
• Light wood-to-wood connections

Chipboard screws are designed to grip wood fibers effectively without splitting the material, ensuring a reliable connection.

Why is 50 mm a logical length?

For a board thickness of approximately 18 mm, the general guideline is:

The screw should penetrate at least 2.5 to 3 times the thickness of the top material into the supporting wood.

18 mm × ±2.8 ≈ 50 mm

Using a 50 mm screw ensures:

✔ Sufficient penetration depth
✔ Good pull-out resistance
✔ A stable connection

This makes 4.0 × 50 mm an ideal choice for furniture construction and sheet materials.

What makes these 4.0 x 50 mm screws suitable for MDF, plywood and solid wood?

When working with medium-thin materials, it is important that:

• The top material is firmly pulled down
• The connection remains stable
• The screw provides sufficient grip

Thanks to the partial thread, two parts are pulled tightly together, creating a clean and durable connection.

The 4.0 mm diameter provides sufficient strength without damaging the material.

Advantages of partial thread at 4.0 x 50 mm

Unlike full thread screws, this version has thread only on the lower section.

This results in:

✔ Better clamping force between two parts
✔ Tighter material connection
✔ Reduced risk of gaps or open joints
✔ Efficient wood-to-wood fastening

For wood connections, partial thread is often the best choice.

Installation and mounting advice

For best results:

• Use a Torx TX20 bit
• Pre-drilling is usually not required in softwood
• Pre-drilling is recommended in hardwood
• Drive the screw slowly and in a controlled manner

Tip: See our category for screwdriver bits and bit holders for the correct bit size and professional-quality tools.

Why order these screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per pack
✔ Clear and complete product specifications per size
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available

This way, you order not only the correct screws but also the necessary tools for efficient installation.

Not sure about the right length? Also view our 4.0×40 mm and 4.0×60 mm variants for thinner or thicker materials.

Specifications

Ask a question about this product