Chipboard screws 5.0 x 50 partial thread

Description

Reliable 5.0 x 40 mm Wood Screws for Light Wood-to-Wood Connections

These 5.0 × 40 mm partial thread chipboard screws are specially designed for light to medium-duty fastening of timber, sheet material, MDF and OSB onto wooden framing. The zinc-plated coating provides corrosion protection for indoor applications.

The Torx TX25 drive ensures excellent grip and minimizes cam-out, allowing fast and controlled installation. The countersunk head sits neatly flush with the material surface, creating a clean finish without protruding screw heads.

With a 5.0 mm diameter, these screws offer increased strength and pull-out resistance compared to 4.5 mm variants, while the 40 mm length is perfectly suited for thinner boards and light timber constructions.

Why choose these 5.0 x 40 mm chipboard screws?

✔ Ideal for 12–15 mm sheet material
✔ Partial thread — firmly pulls two wooden parts together
✔ 5.0 mm diameter — higher load capacity and pull-out resistance
✔ Torx TX25 — optimal grip, reduced cam-out
✔ Zinc plated — corrosion protection for indoor use
✔ Pack of 200 pieces — suitable for project work

When do you use 5.0 x 40 mm screws?

A 5.0 x 40 mm partial thread screw is commonly used for light to medium-duty wood connections and fastening sheet material onto timber framing.

Typical applications:

✔ Fixing 12–15 mm MDF or chipboard
✔ Installing back panels and finishing elements
✔ Light furniture assembly
✔ Interior and finishing projects
✔ Wood-to-wood connections without heavy structural load

Why is 40 mm a suitable length?

For boards of approximately 15 mm thickness, the technical guideline is:

The screw should penetrate at least 2.5 times the thickness of the top material into the supporting timber.

15 mm × 2.5 = 37.5 mm → rounded to 40 mm

With a 40 mm length:

✔ Sufficient penetration depth
✔ Strong clamping force
✔ No unnecessary breakthrough
✔ Stable and reliable light to medium-duty connections

This makes 5.0 x 40 mm a well-balanced choice for standard board thicknesses.

What makes these screws suitable for MDF, OSB and sheet material?

When working with sheet material, it is important that:

✔ The top material is tightly pulled against the supporting timber
✔ The screw provides sufficient grip and pull-out resistance
✔ The joint remains stable without stress or visible gaps

Thanks to the partial thread, only the lower section engages the supporting timber, firmly pulling the top material downward. The 5.0 mm diameter provides additional strength and stability compared to smaller diameters.

Advantages of partial thread at 5.0 x 40 mm

Unlike full thread screws, this version has thread only on the lower section.

Advantages:

✔ Higher clamping force between two wooden parts
✔ Better tightening of sheet material
✔ Reduced risk of open joints
✔ More efficient wood-to-wood fastening

For fastening sheet material onto timber framing, partial thread is generally the better choice compared to full thread.

Installation and mounting advice

For best results:

• Use a Torx TX25 bit
  
• Pre-drilling is usually not required in softwood
• A small pilot hole is recommended in hardwood
• Drive screws in a controlled manner to prevent material damage

Tip: See our category for screwdriver bits and holders for the correct bit size and professional-quality tools.

Why order these screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per pack
✔ Clear and complete product specifications per size
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available

This ensures you order not only the correct chipboard screws, but also the necessary tools for efficient installation.

Not sure about the right length? Also view our 5.0x40 mm and 5.0x60 mm variants for thinner or thicker materials.

Specifications

Ask a question about this product