Chipboard screws 5.0 x 60 partial thread

Description

Reliable 5.0 x 60 mm Wood Screws for Strong Wood-to-Wood Connections

These 5.0 × 60 mm partial thread chipboard screws are developed for medium to heavy-duty wood connections in MDF, OSB, chipboard, plywood, and solid timber. The zinc-plated coating provides durable corrosion protection for indoor applications.

The Torx TX25 drive ensures optimal grip during installation, preventing cam-out and allowing controlled fastening. The countersunk head sits neatly flush with the material surface, creating a clean and professional finish.

With a 5.0 mm diameter and 60 mm length, this screw delivers a strong connection for medium to thicker board thicknesses and timber framing without unnecessary breakthrough.

Why choose these 5.0 x 60 mm chipboard screws?

• Ideal for 20–24 mm thick sheet material
• Partial thread — powerfully pulls two wooden parts together
• 5.0 mm diameter — increased pull-out resistance and strength
• Torx TX25 — prevents cam-out
• Zinc plated — corrosion protection for indoor use
• Pack of 200 pieces — ready for project applications

When do you use 5.0 x 60 mm screws?

A 5.0 x 60 mm partial thread screw is used when greater penetration depth and pull-out resistance are required compared to shorter screws, without excessive protrusion.

Typical applications:

✔ Fixing 20–24 mm MDF, OSB or chipboard
✔ Furniture construction with heavier panels
✔ Timber framing and interior structures
✔ Wall cladding onto battens
✔ Wood-to-wood connections requiring extra stability

Why is 60 mm a logical length?

For sheet material of approximately 20 mm thickness, the technical guideline is:

The screw should penetrate at least 2.5 times the thickness of the top material into the supporting timber.

20 mm × 2.5 = 50 mm
24 mm × 2.5 = 60 mm

With a 60 mm length:

✔ Sufficient penetration depth
✔ High pull-out resistance
✔ Stable and secure connection
✔ Suitable for medium-duty applications

This makes 5.0 x 60 mm a popular size for interior construction and furniture building.

What makes these screws suitable for MDF, OSB and solid timber?

When working with medium to thicker panels, it is important that:

• The top material is firmly pulled against the supporting timber
• The screw provides sufficient grip
• The joint remains stable without stress or visible gaps

Thanks to the partial thread, only the lower section engages the supporting timber, while the upper material is tightly clamped down. The 5.0 mm diameter adds torsional and bending strength required for heavier applications.

Advantages of partial thread at 5.0 x 60 mm

Unlike full thread screws, this version has thread only on the lower section.

This results in:

✔ Higher clamping force between two wooden parts
✔ Better tightening of sheet material
✔ Reduced risk of open joints
✔ More efficient wood-to-wood fastening

For heavy interior connections and structural applications, partial thread is often more effective than full thread.

Installation and mounting advice

For best results:

• Use a Torx TX25 bit
  
• Pre-drilling is usually not required in softwood
• A small pilot hole is recommended in hardwood
• Drive screws in a controlled manner to prevent splitting

Tip: See our category for screwdriver bits and holders for the correct bit size and professional-quality tools.

Why order these screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per pack
✔ Clear and complete product specifications per size
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available

This ensures you order not only the correct chipboard screws, but also the necessary tools for efficient installation.

Not sure about the right length? Also view our 5.0x40 mm and 5.0x50 mm variants for thinner materials.

Specifications

Ask a question about this product