EnergyBy pump group with solar plate exchanger (28 plates) and by-pass with Grundfos UPM3 pump
- Directly available from stock
- Pay as you wish
- 14 days reflection period
- Expert advice.
customers give us a 9.1 at WebwinkelKeur
Description
The EnergyBy pump group with plate exchanger with 28 plates is suitable for water and glycol up to 50%. Equipped with bypass connection and an EBP-25-7.5-180-lll circulation pump with a length of 180mm.
The EnergyBy pump group with solar plate exchanger consists of:
- A heat exchanger, complete with fill/drain valve and safety group
- Direct distribution group on secondary side
The heat exchanger group consists of:
- A heat exchanger, complete with fill/drain valve and safety group, and the fittings needed for the secondary side
- A fill/drain valve and safety group, and the fittings needed for the primary and secondary connection on primary and secondary side
The EnergyBy pump groups with heat exchanger can be used in different system types, such as biomass, solar and heating. They can be installed to;
- Separate circuits with different fluids (i.e. with/without glycol)
- Prevent dirt from entering the circuit of a new system
- Connect an open primary circuit to a secondary with a closed circuit
- Prevent two generators supplying the same system
The group with heat exchanger is complete with fittings for connecting the distribution group. The pressure relief valve and expansion tank connection should be considered as the basic safety requirements for the system connected to the secondary side of the heat exchanger.
Specifications
| Article number | EBHE28-02500-EBP |
| EAN nummer | 7423457710781 |
| Brand | EnergyBy |
| pump group direct with heat exchanger | |
| biomass boiler gas boiler wood gasifier pellet boiler solid fuel boiler central heating (cv) wood stove | |
| pump groups |