Silvermate chipboard screws 6.0 x 180 partial thread - 100 pcs

• Yes → for wood-to-wood connections
• Yes → when you need a screw with partial thread
• Yes → when good grip and power transmission are important
• Yes → for many types of wood
• No → when a drive other than TX-30 is required
• No → when stainless steel is required for damp outdoor applications

What is the SilverMate 6.0 x 180 mm chipboard screw?

The SilverMate 6.0 x 180 mm chipboard screw is a quality screw for applications where wooden parts need to be firmly connected. Thanks to the 180 mm length, the screw grips deeply into the wood, while the 6 mm diameter provides a strong connection.

This version is equipped with partial thread. This means that only the lower part of the screw has thread. As a result, the wooden parts are pulled tightly together during installation.

The Torx TX30 drive provides plenty of grip during installation. This allows powerful and controlled fastening. It makes this SilverMate screw suitable for universal applications in many types of wood.

Does this SilverMate 6.0 x 180 mm screw suit your application?

What makes SilverMate chipboard screws strong in use?

SilverMate chipboard screws are designed for reliable fastening in wood. The combination of Torx drive, partial thread and zinc-plated finish makes this screw practical for many different wood applications.

For this version, this means the screw is suitable for controlled driving, good grip and strong wood-to-wood connections.

• Torx drive: provides better grip and good power transmission.
• Partial thread: pulls wooden parts tightly together.
• 6.0 mm diameter: suitable for strong connections.
• 180 mm length: suitable for deep anchoring in wood.
• Zinc plated: finished with a zinc-plated coating.

When do you use 6.0 x 180 mm screws?

A 6.0 x 180 mm screw is used when a wood connection requires length, grip and clamping force. Thanks to the 180 mm length, this screw is suitable for wood-to-wood connections where the screw must grip deeply enough into the wood.

Why is 180 mm technically logical? With wood connections using thicker parts, the screw must grip sufficiently deep into the wood. This creates a stable connection with good clamping force.

Benefits of partial thread with 6.0 x 180 mm

With longer wood screws, partial thread is an important advantage. Because the upper part of the screw has no thread, the upper wooden part can be pulled freely against the lower wooden part.

This creates strong clamping between both wooden parts. This is especially important for wood-to-wood connections, battens, beams and solid wood constructions.

• wooden parts are actively pulled together
• good clamping force is created
• the upper wooden part stays tight against the lower part
• the connection becomes more stable and neatly finished

For many wood-to-wood connections, partial thread is more effective than full thread.

Installation advice for SilverMate 6.0 x 180 mm

For proper installation, it is important to use the correct bit, tool and working method. Due to the 180 mm length, the screw should be driven in a controlled way, especially in hardwood or when fastening close to the edge of the wood.

• Always use a suitable Torx TX30 bit.
• Use a powerful cordless screwdriver with sufficient torque.
• In softwood, pre-drilling is usually not necessary.
• In hardwood, pre-drilling is recommended.
• Drive the screw in a controlled way to prevent overloading the screw, bit and wood.
• Do not install too close to the edge without pre-drilling to reduce splitting.

The Torx drive provides better grip and good power transmission. In hardwood, end-grain installation or installation near edges, pre-drilling often remains sensible.

Unsure about the right length?

Is 180 mm slightly too long or too short for your application? Then also consider other SilverMate variants from the same range. These may be suitable when you need more or less anchoring depth, while still benefiting from the same SilverMate quality.

Buying SilverMate 6.0 x 180 mm