Silvermate chipboard screws 6.0 x 200 partial thread - 100 pcs

Description

Reliable SilverMate 6.0x200 mm Screws for Heavy Timber Constructions

The SilverMate Next Generation 6.0 × 200 mm partial thread chipboard screws are developed for strong and deeply anchored timber connections. This length falls within the long series (60–200 mm) and features a specifically increased thread pitch, allowing the screw to drive in noticeably faster than standard wood screws.

The combination of:

• 6.0 mm diameter
• 200 mm length
• Partial thread
• Torx TX30 drive

makes this screw suitable for heavy wood-to-wood applications such as beam connections and load-bearing structures.

The zinc-plated version is intended for indoor applications or dry environments.

What Makes SilverMate Next Generation Unique?

SilverMate stands out because each length and diameter has its own optimized thread pitch and specific configuration.

For this 6.0 × 200 mm version, this means:

✔ Increased thread pitch for long screws (60–200 mm): Long screws drive in significantly faster. Modern impact drivers deliver high torque; a larger pitch saves time during deep installation.
✔ 25–30% lower driving resistance in 5.0 and 6.0 mm diameters: Especially with long 6.0 mm screws, driving resistance is noticeably lower compared to many other brands.
✔ Low insertion pressure required: The screw grips the wood immediately from the first rotations. Some Type 17 cutting point screws require considerably more pressure.
✔ Reduced risk of breakage: SilverMate screws are designed to be less prone to snapping under high loads from powerful impact drivers.
✔ Special milling thread at the tip: This cutting feature reduces the risk of splitting, particularly when installing near the end grain of beams or battens.

These properties position SilverMate technically at the level of well-known premium brands.

Why Choose the 6.0 x 200 mm Version?

✔ Ideal for heavy timber joints
✔ Suitable for thick beams and structural members
✔ High pull-out value due to deep anchoring
✔ Faster installation thanks to increased thread pitch
✔ Lower driving resistance in longer lengths
✔ Supplied in packs of 100 pieces

When Do You Use 6.0 x 200 mm Screws?

This size is used for:

• Connecting heavy beams and structural components
• Installing thick wooden framing members
• Securing heavily loaded timber constructions
• Deep anchoring in load-bearing timber
• Wood-to-wood joints where maximum clamping force is required

Why Is 200 mm Technically Logical?

In heavy timber joints, the screw must penetrate deeply enough into the load-bearing timber to:

• Ensure structural stability
• Achieve high pull-out values
• Withstand bending forces

The 6.0 mm diameter provides additional bending resistance and torsional strength during deep installation.

Advantages of Partial Thread in 6.0x200 mm

With long structural screws, partial thread is essential. Because only the lower section is threaded:

✔ Timber elements are actively pulled together
✔ Maximum clamping force is created
✔ No tension remains in the upper material
✔ A tight and stable connection is achieved

For beam-to-beam connections, partial thread is more effective than full thread. Washer head screws can also be a suitable alternative.

Installation and Mounting Advice

For optimal performance:

• Use a Torx TX30 bit
• In softwood, pre-drilling is usually not required
• In hardwood, pre-drilling is recommended
• Use a powerful impact driver for efficient installation
• Drive in a controlled manner to prevent overloading

Thanks to the lower driving resistance at this length, installation is noticeably faster.

Tip: Consult our screwdriver bits and holders category for the correct bit size and quality.

Sustainable Packaging

SilverMate screws are available in plastic-free cardboard packaging or in a durable, resealable impact-resistant plastic bucket, suitable for intensive jobsite use.

Why Order These SilverMate Screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per package
✔ Clear product specifications per size
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available for immediate ordering

This way, you not only order the correct chipboard screws, but also the necessary tools for efficient installation.

Not sure about the correct length? Also view our 6.0x160 mm and 6.0x180 mm variants for thicker materials.

Specifications

Frequently Asked Questions

Ask a question about this product