Silvermate chipboard screws 6.0 x 80 partial thread - 100 pcs

What is the SilverMate 6.0 x 80 mm chipboard screw?

The SilverMate 6.0 x 80 mm chipboard screw is a quality screw for applications where wooden parts need to be firmly connected. Thanks to the 80 mm length, the screw grips well into the wood, while the 6 mm diameter provides a strong connection.

This version is equipped with partial thread. This means that only the lower part of the screw has thread. As a result, the wooden parts are pulled tightly together during installation.

The Torx TX30 drive provides plenty of grip during installation. This allows powerful and controlled fastening. It makes this SilverMate screw suitable for universal applications in many types of wood.

Does this SilverMate 6.0 x 80 mm screw suit your application?

What makes SilverMate chipboard screws strong in use?

SilverMate chipboard screws are designed for reliable fastening in wood. The combination of Torx drive, partial thread and zinc-plated finish makes this screw practical for many different wood applications.

For this version, this means the screw is suitable for controlled driving, good grip and strong wood-to-wood connections.

• Torx drive: provides better grip and good power transmission.
• Partial thread: pulls wooden parts tightly together.
• 6.0 mm diameter: suitable for strong connections.
• 80 mm length: suitable for solid anchoring in wood.
• Zinc plated: finished with a zinc-plated coating.

When do you use 6.0 x 80 mm screws?

A 6.0 x 80 mm screw is used when a wood connection requires grip and clamping force. Thanks to the 80 mm length, this screw is suitable for wood-to-wood connections where the screw must grip sufficiently into the wood.

Why is 80 mm technically logical? With wood connections, the screw must grip sufficiently deep into the timber. This creates a stable connection with good clamping force and long-term reliability.

Benefits of partial thread with 6.0 x 80 mm

With wood screws, partial thread is an important advantage. Because the upper part of the screw has no thread, the upper wooden part can be pulled freely against the lower wooden part.

This creates strong clamping between both wooden parts. This is especially important for wood-to-wood connections, battens, beams and solid wood constructions.

• wooden parts are actively pulled together
• good clamping force is created
• the upper wooden part stays tight against the lower part
• the connection becomes more stable and neatly finished

For many wood-to-wood connections, partial thread is more effective than full thread. Choosing the right thread type can improve clamping performance and overall connection strength.

Installation advice for SilverMate 6.0 x 80 mm

For proper installation, it is important to use the correct bit, tool and working method. Due to the 80 mm length, the screw should be driven in a controlled manner, especially in hardwood or when fastening close to the edge of the timber.

• Always use a suitable Torx TX30 bit.
• Use a powerful drill driver with sufficient torque.
• In softwood, pre-drilling is usually not necessary.
• In hardwood, pre-drilling is recommended.
• Drive the screw in a controlled way to prevent overloading the screw, bit and timber.
• Avoid installing too close to the edge without pre-drilling to reduce the risk of splitting.

The Torx drive provides excellent grip and power transfer. When working with hardwood, end-grain installations or edge applications, pre-drilling often remains the best option.

Unsure about the right length?

Is 80 mm slightly too long or too short for your project? Consider other SilverMate variants from the same range. They may be more suitable when you need either less or more anchoring depth while still benefiting from the same SilverMate quality.

Buy SilverMate 6.0 x 80 mm