Chipboard screws 4.0 x 30 partial thread

Description

Strong 4.0 x 30 mm Wood Screws for Secure Wood-to-Wood Connections

These 4.0 × 30 mm partial thread chipboard screws are specially developed for strong wood-to-wood fixings in MDF, OSB, chipboard and solid wood. The zinc-plated coating provides durable corrosion protection, making these screws ideal for general interior wood projects.

Thanks to the Torx TX20 drive, you benefit from optimal grip during installation. This prevents cam-out and ensures fast and controlled driving.

The countersunk head sits neatly flush in the wood, making these screws perfect for visible work, furniture making and interior construction.

Why choose these chipboard screws?

✔ Ideal length for fastening thin wooden panels
✔ Partial thread — pulls two wooden parts tightly together
✔ Torx TX20 — prevents slipping and screw head damage
✔ Zinc-plated — protected against corrosion
✔ Pack of 200 pieces — suitable for medium-sized projects

When do you use 4.0 x 30 mm screws?

A 4.0 × 30 mm partial thread chipboard screw is commonly used for fastening:

• MDF or OSB boards to wooden framing
• Cabinet and furniture construction
• Back panels and light wood connections
• Trim and finishing work
• Interior wood assembly

Why is 30 mm a logical length?

When fixing standard sheet materials (such as 9–12 mm MDF or chipboard), a 30 mm screw provides sufficient penetration into the underlying wood without protruding through the back.

As a rule of thumb:
The screw should penetrate at least 2.5 to 3× the thickness of the top material into the supporting wood.

This ensures a strong and reliable connection.

What makes these 4.0 × 30 mm screws suitable for MDF and OSB?

MDF and OSB are relatively soft and sensitive materials. Therefore, it is important that:

✔ The screw provides sufficient grip
✔ The top material is firmly pulled down
✔ The head countersinks neatly without damaging the surface

Thanks to the partial thread, only the lower part of the screw engages in the wood. This pulls the top material tightly into place without creating excessive tension along the full screw length.

This reduces the risk of gaps or splitting.

Advantages of partial thread at 4.0 × 30 mm

Unlike full thread screws, this version only has thread on the lower section.

This results in:

✔ Higher clamping force between two wooden parts
✔ Reduced risk of splitting when installed correctly
✔ More efficient wood-to-wood fastening
✔ Tighter fit of sheet materials

For mounting panels onto wooden frames, partial thread is often the better choice.

Installation and mounting advice

For best results:

• Use a Torx TX20 bit for optimal grip
• Pre-drilling is usually not required in softwood
• In hardwood, a small pilot hole can prevent splitting
• Drive screws in slowly and with control to avoid damage

Tip: Check our range of screwdriver bits and holders to order the correct Torx bit right away.

Why order these screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per pack
✔ Clear and complete product specifications
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available

This way, you order not only the right screws, but also the tools needed for efficient installation.

Not sure about the right length? Also check our 4.0×40 mm and 4.0×50 mm variants for thicker materials.

Specifications

Frequently Asked Questions

Ask a question about this product