Chipboard screws 4.0 x 35 partial thread

Description

Strong 4.0 x 35 mm Wood Screws for Light Wood-to-Wood Connections

These 4.0 × 35 mm partial thread chipboard screws are designed for wood connections where good clamping force and limited penetration depth are required. The screws are suitable for applications in solid wood, plywood, MDF, OSB and chipboard.

The Torx TX20 drive ensures optimal grip and efficient torque transfer during installation. This prevents cam-out and allows the screw to be driven in smoothly and with control — especially with shorter screws such as this 35 mm version.

The countersunk head sits neatly flush with the wood surface, providing a clean finish for both structural work and visible applications.

With a 4.0 mm diameter and 35 mm length, this size is ideal for light applications and fastening thin sheet materials and wooden components.

Why choose these chipboard screws?

✔ Ideal for 12–15 mm thick boards and sheet materials
✔ Partial thread — effectively pulls two wooden parts together
✔ 4.0 mm diameter — good balance between strength and ease of use
✔ Torx TX20 — optimal grip with reduced risk of cam-out
✔ Suitable for interior work and light applications
✔ Pack of 200 pieces — ideal for larger jobs

When do you use 4.0 x 35 mm screws?

A 4.0 × 35 mm partial thread chipboard screw is used when a compact wood connection is required without excessive penetration depth.

Typical applications include:

• Fixing 12–15 mm thick boards
• Installing MDF, plywood and chipboard
• Furniture assembly and interior construction
• Fixing panels and battens
• Light wood-to-wood connections

Why is 35 mm a logical length?

For a board thickness of approximately 12 mm, the general guideline is:

The screw should penetrate at least 2.5 to 3 times the thickness of the top material into the supporting wood.

12 mm × ±3 ≈ 35 mm

Using a 35 mm screw ensures:

✔ Sufficient penetration depth
✔ Good pull-out resistance
✔ A stable connection for light applications

This makes 4.0 × 35 mm an ideal choice for thin materials and interior work.

What makes these 4.0 x 35 mm screws suitable for MDF, plywood and solid wood?

When working with thin materials, it is important that:

• The top material is neatly pulled down
• The connection remains tight
• The screw provides sufficient grip

Thanks to the partial thread, two parts are pulled firmly together, creating a clean and reliable connection.

The 4.0 mm diameter provides sufficient strength without damaging the material.

Advantages of partial thread at 4.0 x 35 mm

Unlike full thread screws, this version has thread only on the lower section.

This results in:

✔ Better clamping force between two parts
✔ Tighter material connection
✔ Reduced risk of gaps or open joints
✔ Efficient wood-to-wood fastening

For light applications, partial thread is an efficient choice.

Installation and mounting advice

For best results:

• Use a Torx TX20 bit
• Pre-drilling is usually not required in softwood
• Light pre-drilling is recommended in hardwood
• Drive the screw slowly and in a controlled manner

Why order these screws from EnergyBy?

✔ Directly available from stock
✔ Competitive price per pack
✔ Clear and complete product specifications per size
✔ Fast and reliable delivery
✔ Matching Torx bits and fastening materials available

This way, you order not only the correct screws but also the necessary tools for efficient installation.

Not sure about the right length? Also view our 4.0×30 mm and 4.0×40 mm variants for thinner or slightly thicker materials.

Specifications

Ask a question about this product